This is a very comprehensive drilling jig system for building things like a complete set of kitchen cupboards, free standing wardrobes and bookcases. For accurate, consistent drilling in all panel types and rails removing the need for time consuming marking out. The hole pattern is designed to fit various hardware fittings and all holes are consistent with a 32mm spacing and all in reference to the sides and ends of the panels. Set the rails and rods for drilling on the face or end of a panel, the bush carrier straddles the rail, with the selected size of drill bushing in the hole in the rail where the first hole is to be drilled. Holes are then drilled as required for the design. This Deluxe system 32 jig is supplied with: 3 rails with fixing screws, 2 x regular-length rods (for work up to 12") 2 x long rods ( for work up to 24" wide) 2 x clamp heads and clamp tails, bush carrier with 5,8 and 10mm bushes, gauge head, 2 x dowelling jig bases, connector rods and plate, 3/32" hex key and 2 x register pins . All contained in a strong wooden box except for the rails and long rods.