A floor standing morticer with a 25mm capacity. The unique screw and fast action nut allows the material clamp to be set across its length in seconds. With fully adjustable slideways the morticer has travel in both directions with lock on the fore and aft setting. The main operating handle has a clever ratchet setting which allows it to be quickly set in the correct position for optimum leverage. The depth stop is simple and very effective to use. Along the back of the main table is a mortice length setting device which allows the mortice length to be pre-set for reduced marking out. The cabinet base is fabricated from heavy gauge sheet steel and incorporates a shelf in the base for storage of chisels, bits and service tools. Bushes are provided for 3/4", 13/16" and 1.13/16" shank chisels. Supplied with cabinet base, chisel bushings and service tools.