A medium weight power feed unit with three white rubber rollers, all spring-loaded to provide a constant feed rate on either a planer, saw bench or spindle moulder. There is a choice of four feed speeds, easily selectable by removing the side plate and re-positioning the drive gears. The horizontal and vertical position of the drive head can be precisely adjusted with the aid of the two adjusting screws and then securely locked in place with the two handles. An additional feature is the ability to rotate the head through 90° so that pressure can be applied to the work in either the vertical or horizontal planes. The unit is secured to the table of the machine, either by bolting through or by screwing into holes tapped into the cast iron bed. If drilling the holes into the table of your machine is too disheartening then the purchase of the universal quick fix support plate (800430) is an excellent solution. The plate bolts onto the corner of a table and is clamped in place with the bolts provided. The top of the plate is drilled and tapped to accept all of the power feed units we offer, allowing the unit to be bolted onto whichever machine it is required.